Welcome to a laptop battery specialist
of the Acer Laptop Battery First post by: www.itsbattery.com
New laptop battery tips: This document explains how we recommend you should fully condition your new laptop battery, using a simple battery charge. This will ensure a long battery life and greater durability. It is very common for customers to believe that there is a failure of the battery when in reality they have a battery in perfect condition, which simply requires proper conditioning.
When you receive your battery new laptop, it will be fully paid and unconditional. Please do not turn on your computer when the laptop battery does not work right away. Your battery will normally 8 to 10 cells and releases from reaching its full capacity. However, your battery will not reach their full potential until it has been conditioned for at least fifty times. Until then, you may experience lower performance.
Another common situation you may encounter is the LED indicator on your computer laptop does not give specific information that the Battery is fully air conditioned - it is very common for consumers to believe that their battery is defective. Please do not blame the battery such as Acer BTP-43D1 Battery, Acer TravelMate 220 Battery, Acer BTP-58A1 Battery, acer BTP-60A1 Battery, Acer TravelMate 240 Battery, Acer BTP-52EW Battery, Acer BTP-63D1 Battery, Acer BTP-42C1 Battery, acer BTP-44A3 Battery, Acer BTP-550P Battery, Acer BTP-73E1 Battery! Just follow the instructions below cycle.
During the first charge, your computer may indicate that the mobile charge is complete after a short period (about 15 minutes). It must be expected and considered normal if this happens, remove the battery from your computer laptop and repeat the charging procedure. You must use your computer laptop as usual (without AC adapter plugged in), until the battery is completely down.
Repeat the above procedure for a minimum of eight times in the coming days. Always make sure you allow time for your battery is sufficient to obtain a full charge overnight.
What do these terms mean ?
Cycle - One full load during the night and a full discharge and without the adapter plugged in.
Charge - Night of charge with an AC adapter plugged into the mains.
Discharge - have exhausted the power of your battery (operating thecomputer with your battery is fully charged in thecomputer laptop and AC adapter unplugged).
Condition - This is the process of charge / discharge you must complete. This will increase both the performance and life of your battery.
Duration - The time the battery will last.
About 577 million household primary batteries (non rechargeable) batteries have been sold in the United Kingdom in 1998. They are used in a wide range of everyday devices like flashlights, radios and electric toys. Nickel Cadmium (NiCd) batteries are also common in households, in equipment such as power tools, camcorders, computers phones and mobile phones (there is a separate fact sheet on mobile phones). A dry battery requires fifty times more energy than it overlooks.
There have always been difficulties with recycling technology for general (non-rechargeable), as efficient separation and collection of many different types of batteries is difficult. The area of UK has now eliminated mercury from their own products, although a small number of batteries containing mercury are still imported from abroad. Check with the battery manufacturer to see if they are operating a system of recycling or recovery. This is particularly needed for battery NiCd s because they are the most dangerous type of battery in the house.
0 comments:
Post a Comment